19-P-4 pressure-locked grating is a metal bar grating configuration with bearing bars spaced 1-3/16 inches (approximately 30 mm) centre to centre and crossbars spaced 4 inches (approximately 102 mm) centre to centre.
Known as Borden Type B, this configuration provides an open grid suitable for industrial flooring, walkways and other applications requiring drainage, ventilation and structural support.
What Does the 19-P-4 Designation Mean?
The specification identifies three important characteristics:
- 19: Bearing bars spaced 19/16 inches (1-3/16 inches) centre to centre.
- P: Pressure-locked construction, using a mechanical connection rather than resistance welding.
- 4: Crossbars spaced 4 inches centre to centre.
Borden manufactures pressure-locked grating by hydraulically pressing precisely slotted bars together to create a permanent mechanical lock. This process produces clean, uniform lines and provides lateral support.
Where Is This Grating Commonly Used?
For Canadian industrial and commercial projects, 19-P-4 grating may be considered for:
- Industrial maintenance platforms and equipment access areas.
- Walkways and open-grid flooring.
- Ventilation openings and drainage applications.
- Architectural features requiring a consistent grid pattern.
Its open construction allows air, water and some debris to pass through. However, the opening size must be appropriate for the intended use, particularly where pedestrians or wheeled equipment are involved.
How Does 19-P-4 Compare With 19-W-4?
Both configurations use the same nominal bearing-bar and crossbar spacing. The primary difference is their construction.
19-P-4 uses mechanically interlocked bars, while 19-W-4 uses resistance-welded connections. Pressure-locked construction offers a clean, uniform appearance and flexibility in bar configurations.
Neither construction method automatically guarantees greater load capacity. Performance depends on the complete grating design, materials and support conditions.
What Should Canadian Specifiers Consider?
Before selecting this grating, confirm:
- Loading: Expected loads, clear span and allowable deflection.
- Material: Carbon steel, galvanized steel, aluminum or stainless steel.
- Installation: Panel dimensions, bearing-bar direction and fastening requirements.
- Environment: Exposure to moisture, corrosion, snow and ice.
Applicable building codes, workplace safety requirements and accessibility standards should also be reviewed. The spacing designation alone does not establish regulatory compliance.
Choosing the Right 19-P-4 Grating
When specifying 19-P-4 grating in Canada, consider the entire application rather than relying on the spacing code alone.
Review Borden’s pressure-locked grating products and technical load tables, or contact Borden for assistance selecting the appropriate configuration.
Quick FAQ
Borden identifies 19-P-4 pressure-locked grating as Type B.
Not necessarily. Load capacity depends on bearing-bar dimensions, material, clear span and support conditions rather than construction type alone.
Yes, provided the selected material, finish and installation are suitable for the expected weather, corrosion exposure and loading conditions.

