19-W-2 bar grating is resistance-welded grating with bearing bars spaced 1-3/16 inches (approximately 30 mm) centre to centre and crossbars spaced 2 inches (approximately 51 mm) centre to centre.
For buyers researching 19-W-2 grating for Canadian projects, the closer crossbar spacing is its defining feature. However, the pattern alone does not establish load capacity or suitability for a particular installation.
What Does the 19-W-2 Designation Mean?
The three parts of the designation describe the layout and construction:
• 19 identifies bearing bars at 19/16-inch centres.
• W means the crossbars are resistance welded to the bearing bars.
• 2 identifies crossbars at 2-inch centres.
Borden identifies 19-W-2 as Type W/F in its welded grating range. It is a grid designation, not a complete engineering specification.
What Makes 19-W-2 Different From 19-W-4?
Both patterns have the same bearing-bar spacing, but 19-W-2 places crossbars twice as frequently. This creates shorter openings along the bearing-bar direction and a visibly tighter grid.
That difference may influence how the surface interacts with small objects, footwear or equipment, but it should not be treated as proof of improved slip resistance, accessibility or load performance. Those questions require a review of the complete product and intended use.
Where Might This Grating Be Used?
19-W-2 can be considered for industrial walkways, service platforms and maintenance areas where a more closely spaced welded grid is desirable. In these settings, open grating can permit water and debris to pass through while allowing airflow.
The final choice depends on pedestrian traffic, equipment, exposure and the installation environment. An industrial maintenance platform, for example, may have different requirements from a public-access walkway.
What Should Canadian Specifiers Confirm?
Before ordering welded bar grating, confirm these project details:
• Design loads, clear span and allowable deflection.
• Bearing-bar depth, thickness and direction of span.
• Panel dimensions, support conditions and fastening method.
• Surface requirements, protective finish and corrosion exposure.
• Applicable building, workplace safety and accessibility requirements.
Use Borden’s load tables to check the selected bearing-bar size against the required span and loading conditions. For unusual or concentrated loads, seek project-specific engineering guidance.
Choosing 19-W-2 Grating With Confidence
For 19-W-2 grating in Canada, start with the application and use the spacing code to narrow the options. The right bearing-bar size, supports and finish matter just as much as the grid pattern.
Explore Borden’s welded grating products and load tables, or contact Borden to discuss your requirements.
Quick FAQ
Not necessarily. Closer crossbar spacing does not, on its own, determine load capacity. Bearing-bar size, span, material and support conditions must also be evaluated.
Borden lists 19-W-2 welded grating as Type W/F.
Yes, where the selected grating, protective finish and installation design are suitable for local weather, corrosion exposure, drainage and loading.

